Stryker 3000 - Page 12

Foot Board/Head Board Operation Guide
11
FOOT BOARD CONTROL PANEL GUIDE (Continued)
1. Push to turn the Dynamic Mattress system on or off (see page 20).
2. Push to activate automatic or manual modes (see page 20).
" This panel is optional equipment.
1. LCD – displays patient weight.
2. Push to zero bed (see page 16 & 18).
3. Push when changing equipment on the bed (see page 16 & 18).
4. Push to change weight from pounds to kilograms or back (see page 17 & 18).
5. Push to turn weigh system on (see page 16 – 18).
6. Push to decrease numerical value of displayed weight (see page 17 & 19).
7. Push to increase numerical value of displayed weight (see page 17 & 19).
" This panel is optional equipment.
NOTE
See page 12 for explanation of LED’s.
ON
OFF
1
AUTO
MAN
2
1
23 4
567
SCALE
ON