Stryker altrix - Quick Start Guide Manual

8001-069-002 Rev B.2 Refer to the Altrix Precision Temperature Management System Operations Manual for additional information.
card 1A
Quick start guide for
Altrix
™
Precision Temperature Management System
Setup
Fill the reservoir
The removable reservoir is translucent for you
to see the water levels.
1. Fillthereservoirwithvelitersofsterile
distilledwater.Donotllpastthelllineto
avoidwateroverow.
2. If you remove the reservoir from the
controllertollitwithsteriledistilledwater,
replaceitbygentlyloweringthereservoir
backintoposition.Makesurethatitissecure.
Power on
1. Plugthepowercordintoawalloutlet.
2. TaptheStand-bybuttontostarttheproduct.
A
• Always use sterile distilled water or water that has been
passedthroughalterlessthanorequalto0.22microns
withthisproduct.
• Alwaysllthereservoirwithroomtemperaturesterile
distilled water to reduce the risk of burn.
• Donotoverllthereservoirtoavoidtheriskofwater
spillageandfall.
Caution
!
Quick start guide for
Altrix
™
Precision Temperature Management System