Stryker LIFEPAK 15 User Manual

Page 6
LIFEPAK 15 Monitor/Defibrillator
Noninvasive blood pressure
monitoring procedure
1. Press ON
2. Select appropriate sized cuff, attach snugly to extremity;
align cuff marking (if present) with artery
3. Connect tubing to the cuff and to the NIBP port
on the monitor
4. Change initial ination pressure if necessary—Default:
160 mmHg
5. Position extremity in relaxed and supported position
at heart level
6. Inform patient that cuff will inate and squeeze arm
7. Press NIBP to start measurement
NIBP
To cancel measurement, press NIBP again
When the measurement is complete, systolic, diastolic, and mean
arterial pressures are displayed.
NIBP measurement typically takes 40
seconds to complete. If the measurement
is not completed in 120 seconds, the cuff
automatically deates.

Stryker LIFEPAK 15 Specifications

General

Battery	Lithium-ion
Defibrillator	Yes, biphasic
Defibrillation Energy Range	1-360 J
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
EtCO2 Monitoring	Yes
Invasive Pressure Monitoring	Yes
Temperature Monitoring	Yes
Connectivity	Bluetooth, WiFi
ECG Monitoring	12-lead