18
Cleaning and Maintenance
Warning
To avoid electric shock and potentially fatal injury, unplug the transmitter from the
electrical outlet before cleaning�
Caution
• Do not spray cleaning liquid directly onto the devices as product damage may result�
Spray cleaning liquid on the cloth before wiping the devices�
• Do not immerse the devices in any liquid as product damage will result�
• Do not use corrosive cleaning solutions to clean the devices as product damage may
result�
• Do not sterilize the devices as product damage may result�
Cleaning the Display and Transmitter
Display
Note: For complete display cleaning instructions, refer to the VisionPro 26" LED Display
manual, P22286.
Transmitter
1� Apply a standard disinfectant or mild detergent to a dry, sterile cloth� Do not saturate the
cloth�
2� Wipe the device� Do not allow liquid to drip from the cloth or collect on the device�
To Next Page
Loading...
