Stryker SYNK - About Your Device

6
About Your Device
The SYNK Wireless System consists of:
VisionPro SYNK 26” Wireless LED Display
REF: 0240-031-000
The VisionPro SYNK 26” LED Display is a wide screen LED surgical display that can support a
maximum resolution of WUXGA (1920x1200)� The display supports the following video inputs:
DVI, S-Video, and C-Video/SOG� Once the wireless functionality is enabled, the display supports a
wireless digital RGB video input� The display also supports a USB port and serial communication via
the RS232 port�
Note: For details and instructions on using the VisionPro SYNK 26" Wireless LED Display, refer
to the VisionPro User Manual (P22286). This manual provides instructions for using the display
and the transmitter together.
SYNK Wireless Transmitter
REF: 0240-031-010
The SYNK Wireless Transmitter allows the VisionPro SYNK 26” Wireless LED Display to receive a
high-denition video signal over a radio-frequency link� The transmitter also controls the viewing
mode, so the user can switch between picture-in-picture, picture-by-picture, and full screen
mode�