Stryker SYNK - Technical Specifications

20
Technical Specications
SYNK Wireless Transmitter
Video Digital
Input/Output
Input: One Digital Video Interface (DVI) Connector: 29-pin DVI-I
Output: One Digital Video Interface (DVI) Connector: 29-pin DVI-I
Video
Formats
1920 × 1080 @ 60 Hz
1920 × 1080 @ 50 Hz
1280 × 1024 @ 60 Hz
1280 × 1024 @ 50 Hz
1280 × 720 @ 60 Hz
1280 × 720 @ 50 Hz
Total
Shipping
Weight
13�23 lbs (6�0 kg)
Transmitter
Console
Dimensions
12�5 in W x 3�2 in H x 12�5 in D (31�8 cm W × 8�1 cm H × 38�1 cm D)
Wireless Frequency: 4�9 GHz – 5�9 GHz
Channel Bandwidth: 20 MHz
Channel Allocation: Automatic frequency selection with prescan
Protocol: Orthogonal Frequency Division
Multiplexing (OFDM) with Multiple Input Multiple Output (MIMO)
Wireless
Frequencies
of operation
5�15-5�825 GHz
Maximum
Power Output
10 mW
Channel
Bandwidth
20 MHz
Channel
Allocation
Automatic frequency selection with WiFi avoidance
Encoding Orthogonal Frequency Division Multiplexing with AES 256 bit
encryption
Antenna 5x4 MIMO
Note: The SYNK wireless system uses a proprietary transmission method, which cannot
connect to or be accessed by 802�11 devices�
Electrical
Electrical
Input Ratings
100 – 240VAC (600-250 mA) @ 50 – 60Hz