5
The user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving unit.
• Increase the separation distance between the units.
• Connect the unit to an outlet on a circuit dierent from that to which the other unit(s)
are connected.
• Consult the manufacturer or eld service technician for help.
• To ensure electromagnetic compatibility, refer to the “Electromagnetic Compatibility” section
of this manual� The VisionPro SYNK 26” Wireless LED Display (REF 0240-031-000) and the
SYNK Wireless Transmitter (0240-031-010) must be installed and operated according to the
EMC information provided in this manual�
The warranty is void if any of these warnings or cautions are disregarded�
These products contains electrical waste or electronic equipment� They must not be disposed of
as unsorted municipal waste and must be collected separately�
To Next Page
Loading...
