Strymon blueSky - Rear Panel Connections: USB, 9 VDC, EXP;MIDI

pg 6
blueSky - reverberator
Rear Panel I/O and Control (cont.)
9VDC
Use the included power
supply or an adapter with the
following rating:
• 9VDC, center negative
• 300mA minimum
USB
Computer connection for MIDI
control as well as for perform-
ing firmware updates�
EXP / MIDI
Multifunction communication jack for external control of blueSky’s fea-
tures and functions� Can be set to operate in one of the following modes�
(See “Configuring the EXP/MIDI Jack” on page 12 for details�)
Expression Pedal mode (see page 14)�
Favorite mode (see page 15)�
MIDI mode (see “Configuring MultiSwitch Plus” on page 17 or
“Saving Presets in MIDI Mode” on page 24)�