pg 24
blueSky - reverberator
MIDI Functionality (cont.)
Saving Presets in MIDI Mode
When in MIDI mode, the currently loaded settings can be saved to any of
blueSky’s 300 preset locations at any time�
1 To enter Save mode, press and hold the FAV footswitch� The FAV LED
will blink BLUE to indicate that blueSky is waiting to receive a MIDI
Program Change message�
2 To save the current state of the pedal to the currently loaded preset
location, press and hold the FAV footswitch until its LEDs lights BLUE�
OR
To save the current state of the pedal to any preset location, send
the unit a MIDI Program Change on blueSky’s currently selected
MIDI channel� For example:
• Send MIDI Program Change #10 to save the preset to the corre-
sponding memory location on the pedal�
• To recall this preset, send MIDI Program Change #10 from your
MIDI controller or sequencer
NOTE: Press the ON footswitch to cancel the save operation�
To Next Page
Loading...
