pg 7
blueSky - reverberator
Live Edit Functions
Boost/Cut
Boosts or cuts the volume by 3dB when the pedal is engaged�
1 Press and hold the ON footswitch� Once both LEDs flash, release the
footswitch�
2 Turn the MIX (BOOST/CUT) knob to smoothly adjust the amount
of output level cut or boost� Unity gain is at the 12 o’clock position
(default)� The ON LED will light to indicate your setting:
• -3dB: GREEN
• +3dB: AMBER
3 Press the ON footswitch to exit and store your Boost/Cut setting�
NOTE: The Boost/Cut setting is saved per Favorite setting or per MIDI preset�
To Next Page
Loading...
