Strymon cloudburst - Page 4

Rear Panel
mono
1. I/O MODE SELECTOR
mono
mono input, mono output
mono stereo
mono input, stereo output
stereo
stereo input, stereo output
Stereo I/O requires a TRS adapter or
cable. See User Manual for details.
2. USB
Computer connection for MIDI I/O
and firmware updates.
3. INPUT
High impedance, ultra low-noise,
discrete Class A JFET stereo preamp .
4. OUTPUT
Low impedance TRS stereo output.
5. EXP/MIDI
Communication jack for external
control. Can be set to operate in
one of five modes: Expression
Pedal, Favorite, Freeze, Infinite, or
MIDI. See User Manual for details.
6. 9VDC
Only use an adapter with the
following rating: 9VDC, center-
negative, 250mA minimum (sold
separately).