Studer D19 MicVALVE - General; Scope of Delivery; Options; Accessories

D19 MicVALVE
E1/2 Come in! Date printed: 9.2.2000
1.2 General
1.2.1 Scope of Delivery
The D19 MicVALVE (order No. 66.655.000.00) is supplied with an IEC
320/C13 socket, a hex-socket-screwdriver (2.5 mm), and this manual.
1.2.2 Options Order No.
Digital Audio Output Options:
ADAT Interface: 8-channel optical digital audio output card 1.650.050.20
for connecting with the ADAT and compatible
8-channel recorders or other equipment featuring
the ADAT standard connectors.
TDIF-1 Interface: 8-channel digital audio output card 1.650.052.20
for connecting with the DA-88 and compatible
8-channel recorders or other equipment featuring
the TDIF-1 standard connectors.
Note: These two options are identical to the ones used for the eight-channel D19
MicAD preamp; the channel routing, however, can be selected individually
on the D19 MicVALVE.
Super ADC: Converter assembly for further improving 1.655.042.00
the A/D performance
1.2.3 Accessories Order No.
Accessories/Spares: Kit, consisting of: 20.020.302.51
• Mating XLR connectors (7 pcs. male,
5 pcs. female)
• Rotary knobs (2 × small, 1 × large)
• Rack mounting screws with washers
(4 pcs. each)
Interface cables: ADAT/Alesis optical interface cable, 10.325.010.00
length 1.0 m
ADAT/Alesis optical interface cable, 10.325.011.00
length 5.0 m
TDIF-1/Tascam interface cable F-10.025.031.08
“PW 88D”, length 1.0 m
TDIF-1/Tascam interface cable F-10.025.031.09
“PW 88D”, length 5.0 m