Studer Innotec SA
Quick guide RCC-02/-03
10 V 6.1.0 Quick guide
Xtender parameter description
Delay before closing transfer relay
Limitation of the power Boost
Maximum current of AC source (Input limit)
Max input current modification
Using a secondary value for the maximum current of
the AC source
Second maximum current of the AC source (Input limit)
Decrease max input limit current with AC-In voltage
Decrease of the max. current of the source with input
voltage activated by remote entry
AC input low limit voltage to allow charger function
Adaptation range of the input current according to the
input voltage
Speed of input limit increase
Charge current decrease coef. at voltage limit to turn
back in inverter mode
Overrun AC source current limit without opening the
transfer relay (Input limit)
Type of detection of the grid loss (AC-In)
Tolerance on detection of AC-input loss (tolerant UPS mode)
Input voltage giving an opening of the transfer relay with delay
Time delay before opening of transfer relay
Input voltage giving an immediate opening of the transfer
relay (UPS)
Absolute max limit for input voltage
Delta frequency allowed above the standard input frequency
Delta frequency allowed under the standard input frequency
Duration with frequency error before opening the transfer
AC-IN current active filtering (Not in parallel)
Use an energy quota on AC-input
Combination of the events for the auxiliary contact (AUX 1)
Temporal restrictions (AUX 1)
To Next Page
Loading...
Need help?
General
