Studer Innotec SA
Quick guide RCC-02/-03
12 V 6.1.0 Quick guide
Xtender parameter description
Battery voltage 2 activate (AUX 1)
Battery voltage 2 (AUX 1)
Battery voltage 3 activate (AUX 1)
Battery voltage 3 (AUX 1)
Battery voltage to deactivate (AUX 1)
Delay to deactivate (AUX 1)
Deactivate if battery in floating phase (AUX 1)
Contact active with inverter power or Smart-Boost (AUX 1)
Inverter power level 1 activate (AUX 1)
Inverter power level 2 activate (AUX 1)
Inverter power level 3 activate (AUX 1)
Inverter power level to deactivate (AUX 1)
Time delay to deactivate (AUX 1)
Contact active according to battery temperature (AUX 1)
With BSP or BTS
Contact activated with the temperature of battery
(AUX 1)
Contact activated over (AUX 1)
Contact deactivated below (AUX 1)
Contact active according to SOC (AUX 1) Only with BSP
Contact activated with the SOC 1 of battery (AUX 1)
Contact activated below SOC 1 (AUX 1)
Contact activated with the SOC 2 of battery (AUX 1)
Contact activated below SOC 2 (AUX 1)
Contact activated with the SOC 3 of battery (AUX 1)
Contact activated below SOC 3 (AUX 1)
Contact deactivated over SOC (AUX 1)
Delay to deactivate (AUX 1)
Deactivate if battery in floating phase (AUX 1)
Security, maximum time of contact (AUX 1)
Maximum time of operation of contact (AUX 1)
Reset all settings (AUX 1)
Combination of the events for the auxiliary contact (AUX 2)
Temporal restrictions (AUX 2)
To Next Page
Loading...
Need help?
General
