1 Sensor Tower
The sensor tower is an aluminum stand containing a high resolution USB 3.0 3D camera that is used to
capture the body in 3D. It connects to a notebook computer via USB 3.0 SuperSpeed cable (provided).
It weighs approximately 13 lbs (6 kg).
2 Rotating Platform
The rotating platform turns the body while data is being captured so that the sensor can see the body
from all angles. It connects to a notebook computer via USB 2.0 cable (provided). The platform weighs
approximately 23 lbs (10.5 kg) and can support a max load of 550 lbs (250kg). A full rotation takes
approximately 30-40 seconds.
3 Notebook Computer
A notebook computer is included. The notebook includes a powerful Intel processor and a gaming
quality graphics card capable of processing the captured body data to create 3D body scans. The Styku
Studio software can be downloaded via Styku’s Client Portal, at https://app.styku.com .
To Next Page
Loading...