Setting Up Your Styku S100
Create Your Styku Account
• Connect notebook computer to an available WiFi Network
**Internet connection is required to use the Styku S100 Software**
Use the Windows network connection tool to connect the notebook computer to an available WiFi network.
An internet connection is required to use the Styku S100 software.
• Double-click the “How to use Styku” link on the desktop.
OR
Visit https://app.styku.com from a web-enabled computer
The included notebook computer comes pre-installed with a link to setup instructions for the Styku S100.
Press the “How to use Styku” link on the desktop to go to Styku’s website. Alternatively, you can visit Styku’s
website at https://app.styku.com from a web-enabled computer.
• On Styku’s website, click the “Sign up Now” link to create Styku User Account- this will allow you to
activate your Styku S100 software and view any additional setup instructions
On Styku’s website, Press the “Sign up now” link to create your Styku account. Once you have an account, you
will be able to activate your Styku S100 software and view additional setup instructions.
Activate your Styku S100 Software
• Launch the Styku software on the notebook by double-clicking the Styku icon on desktop
• When prompted, enter your Styku Account email and password and continue
Launch the Styku software on the notebook computer by double-pressing the Styku icon on the desktop. You
will see a window appear asking for your email address and password. Enter the email and password you used
to create your Styku account to activate the software and continue.
Position the sensor tower and rotating platform
Note: You can view a video of the hardware setup process by visiting the Styku website and choosing the
Support\Setup link, at https://app.styku.com .
The rotating platform should be placed in front of the sensor tower, with 21 inches (53 cm) of empty space
around it on all sides. The front of the turntable should be about 46 inches (117 cm) away from the sensor
tower.
To Next Page
Loading...