Why is my Styku Scanner application freezing or running slow?
If the Styku Scanner application is freezing or running slowly, you should check for and install any available Windows updates. If that doesn't resolve the issue, try restarting your computer.
What to do if Styku S100 Scanner turntable isn’t working?
If the turntable of your Styku Scanner isn’t working, first ensure that the power adapter is connected to both the turntable and a power outlet. Next, check that the USB cable is securely connected to both the turntable and the computer. Finally, if your turntable has a power switch, make sure it is turned on.
What to do if my Styku S100 shows a connection error?
If your Styku Scanner is showing a connection error, ensure that you are connected to the internet using either Wi-Fi or Ethernet cables. Also, verify that your Wi-Fi card drivers are updated.
How to fix a choppy 3D camera view on my Styku S100?
If the 3D camera view on your Styku Scanner stutters, lags, or looks choppy, make sure that your laptop is plugged in. Additionally, ensure that your computer is set to “high performance” mode in the power options within the control panel.
What to do if the Styku Scanner face is distorted or limbs are missing?
If the scan from your Styku Scanner shows a distorted face or missing limbs, it's likely because the subject moved during the scan. Remind the person being scanned to face forward and remain as still as possible.
What to do if Styku Scanner sensor is not detected?
If the Styku Scanner sensor is not detected, check the cables and adapter plugs. Try disconnecting the USB from the computer, restarting the computer, and then reconnecting the USB. You can also try connecting to a different USB 3.0 port.
Details essential safety measures for product use and environment.
Highlights risks associated with power supply units and cables.
Advises on managing cables and platform to prevent hazards.
Guides on setting up an account for software activation and access.
Instructs on activating the software using account credentials.
Provides guidance on optimal placement of hardware components.
Details opening the Styku software and starting a scan.
Guides on positioning the subject on the turntable for scanning.
Explains how to view and interpret measurement accuracy results.
General| Type | 3D Body Scanner |
|---|---|
| Technology | Infrared Depth Sensors |
| Scan Time | 35 seconds |
| Compatibility | Windows 10 |
| Data Output | 3D Mesh |
| Data Export Formats | OBJ, STL |
| Software Compatibility | Styku Software |
| Connectivity | USB, Wi-Fi |
| Power Requirements | 110-240V |
To Next Page