EasyManua.ls Logo

Subaru 2000 Legacy - Clock; High Beam Indicator Light; Shift Position Indicator (for at Vehicles); Turn Signal Indicator Lights

Subaru 2000 Legacy
413 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Legacy U.S.A. (66L) A2260BEB
3-16
J Shift position indicator (for AT vehicles)
This indicator shows the position of the shift lever.
J Turn signal indicator lights
These lights show the operation of the turn signal or lane change signal.
If the indicator lights do not blink or blink rapidly, the turn signal bulb
may be burned out. Replace the bulb as soon as possible. Refer to the
Replacing bulbs section in chapter 11.
J High beam indicator light
This light shows that the headlights are in the high beam mode.
This indicator light also comes on when operating headlight flasher.
Clock
HB2013BA
To set the time, turn the setting knob clockwise to advance and counter-
clockwise to retard the time. Time can be set only when the ignition
switch is in the ON position.

Table of Contents

Other manuals for Subaru 2000 Legacy

Related product manuals