Subaru 2000 Legacy - Heater Operation Modes

Legacy U.S.A. (66L) A2260BE–B
4-6
HB5008BB
ON position: Interior air is recirculated inside the vehicle. Push the air
inlet selection button to the ON position. The indicator light will come
on.
OFF position: Outside air is drawn into the passenger compartment.
Push the air inlet selection button again to the OFF position. The indi-
cator light will go off.
J Heater operation
B Defrosting or defogging the windshield
HB5011AA
To direct warm air to the windshield and front door windows:
1. Set the air inlet selection button to the “OFF” position.
2. Set the air flow control dial to the “
” position.
3. Turn the temperature control dial all the way to the right.