EasyManua.ls Logo

Subaru 2000 Legacy - Stopping the Engine Safely

Subaru 2000 Legacy
413 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Legacy U.S.A. (66L) A2260BEB
7-10
J Starting the engine during cold weather below 4°F
(20°C)
If the engine is difficult to start using the normal method (without de-
pressing the accelerator pedal), turn the ignition switch to the START
position while slightly depressing the accelerator pedal.
J Starting a flooded engine
If the engine does not start, it may be flooded (excessive fuel in the en-
gine).
In case of a flooded engine, turn the starter motor for five seconds with
the accelerator pedal fully depressed. Repeat this two or three times until
the engine starts. Release the ignition switch and accelerator pedal as
soon as the engine starts.
Stopping the engine
WARNING
Do not stop the engine when the vehicle is moving. This will
cause loss of power to the power steering and the brake booster,
making steering and braking more difficult. It could also result in
accidental activation of the LOCK position on the ignition
switch, causing the steering wheel to lock.
The ignition switch should be turned off only when the engine is idling.

Table of Contents

Other manuals for Subaru 2000 Legacy

Related product manuals