Legacy U.S.A. (66L) A2260BE–B
1-22
J Adjusting the front seat shoulder belt anchor height
WARNING
When wearing the front seatbelts, make sure the shoulder portion
of the webbing does not pass over your neck. If it does, adjust
the seatbelt anchor to a lower position. Placing the shoulder belt
over the neck may result in neck injury during sudden braking or
in a collision.
HB1029BB
The shoulder belt anchor height should be adjusted to the position best
suited for you. To lower the anchor height, push the release button and
slide the anchor down. To raise the anchor height, slide the anchor up.
Pull down on the anchor to make sure that it is locked in place.
Always adjust the anchor height so that the shoulder belt passes over
the middle of the shoulder without touching the neck.
To Next Page
Loading...
