EasyManua.ls Logo

Subaru 2000 Legacy - Windshield Wiper Deicer (if Equipped)

Subaru 2000 Legacy
413 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Legacy U.S.A. (66L) A2260BEB
3
Instruments and controls
3-27
CONTINUED
Windshield wiper deicer (if equipped)
CAUTION
To prevent the battery from being discharged, do not operate the
windshield wiper deicer continuously for any longer than neces-
sary.
HB2027BB
The windshield wiper deicer operates only when the ignition switch is in
the ON position.
Before turning on the windshield wiper deicer, remove any snow from the
windshield. To turn on the windshield wiper deicer, push the switch. The
indicator light located on the switch lights up while the windshield wiper
deicer is operating.
The windshield wiper deicer will automatically shut off after about 15 min-
utes. If the wiper blades have been deiced completely before that time,
push the switch to turn it off. It also turns off when the ignition switch is
turned to the ACC or LOCK position. If deicing is not complete when
you restart your vehicle, you have to push the switch to turn the deicer
on again.

Table of Contents

Other manuals for Subaru 2000 Legacy

Related product manuals