EasyManua.ls Logo

Subaru 2000 Legacy - Brake Pad and Lining Replacement

Subaru 2000 Legacy
413 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Legacy U.S.A. (66L) A2260BEB
11
Maintenance and service
11-33
CONTINUED
Replacement of brake pad and lining
CAUTION
If you continue to drive despite the scraping noise from the audi-
ble brake pad wear indicator, it will result in the need for costly
brake rotor repair or replacement.
OM-H0163
The front disc brakes and the right rear disc brake have an audible wear
indicators on the brake pads. If the brake pads wear close to their ser-
vice limit, the wear indicator makes a very audible scraping noise when
the brake pedal is applied.
If you hear this scraping noise each time you apply the brake pedal,
have the brake pads serviced by your SUBARU dealer as soon as pos-
sible.
B Breaking-in of new brake pads and linings
When replacing the brake pad or lining, use only genuine SUBARU
parts. After replacement, the new parts must be broken in as follows:
n Brake pad and lining
While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on
the brake pedal lightly. Repeat this five or more times.

Table of Contents

Other manuals for Subaru 2000 Legacy

Related product manuals