Legacy U.S.A. (66L) A2260BE–B
11
Maintenance and service
11-55
– CONTINUED –
n Back-up and brake/tail light bulbs
HBB025BAHBB026BC
1. Unlatch the rear combination light cover by moving the knob up-
ward. Open the cover up.
2. Remove the bulb socket from the rear combination light assembly
by turning it counterclockwise.
3. Remove the bulb from the socket by pushing it and turning coun-
terclockwise. Install a new bulb in the socket.
4. Set the bulb holder into the rear combination light assembly and
turn it clockwise until it locks.
5. Close the cover and latch the lock.
J License plate light
HBB027BAHBF013EA
1. Remove the mounting screws using a phillips screwdriver.
To Next Page
