Legacy U.S.A. (66L) A2260BE–B
1
Seat, seatbelt and SRS airbags
1-21
– CONTINUED –
HB1033BA
2. After confirming that the webbing is not twisted, insert the smaller
tongue plate attached at the webbing end into the buckle (smaller
one on the right-hand side) until a click is heard. If the belt stops be-
fore reaching the buckle, return the belt slightly and pull it out more
slowly. If the belt still cannot be unlocked, let the belt retract slightly
after giving a strong pull on it, then pull it out slowly again.
HB1034BA
HB1035BA
3. Insert the larger tongue plate in the larger buckle marked “CEN-
TER” on the left-hand side until it clicks. To make the lap part tight,
pull up on the shoulder belt. And place the lap belt as low as possible
on your hips, not on your waist.
To Next Page
Loading...
