Legacy U.S.A. (66L) A2260BE–B
11
Maintenance and service
11-59
– CONTINUED –
2. Pull the bulb out of the socket. Install a new bulb.
3. Reinstall the cover.
B Station wagon
HBB028BA
1. Remove the mounting screw covers by prying on the edge with a
screwdriver.
2. Remove the mounting screws using a phillips screwdriver and then
remove the high mount stop light cover.
3. Pull the bulb out of the socket. Install a new bulb.
4. Reinstall the cover.
5. Tighten the mounting screws then reinstall the covers.
NOTE
Other bulbs may be difficult to replace. Have your SUBARU dealer
replace these bulbs if necessary.
To Next Page
