北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
& Welcome screen (opening
animation) and Good-bye
screen (ending animation)
S03BN08
When the driver’s door is opened and
closed after unlocking the door, the Wel-
come screen (opening animation) will
appear on the combination meter display
(color LCD) for approximately 20 seconds.
When the ignition switch is turned to the
“LOCK”/“OFF” position, the combination
meter display (color LCD) gradually turns
off while showing the Good-bye screen
(ending animation).
NOTE
. The welcome screen and the good-
bye screen may differ in the actual
words and appearance.
. Once the Welcome screen appears,
it takes a certain period of time to
display it again.
. The Welcome screen will disappear
after turning the ignition switch to the
“ON” position while the Welcome
screen is displayed.
. If you open any of the doors while
the Welcome screen is displayed, the
door ajar warning will appear.
. You can set the Welcome screen and
Good-bye screen to on or off. For
details, refer to “Welcome Good-bye
Screen” F3-43.
& Warning screen
S03BN05
Example of warning
If a warning or a malfunction is detected, a
message will appear. Take the appropriate
actions based on the messages indicated.
& Basic screens
S03BN06
Pull the “ ” or “ ” switch on the steering
wheel to change the screen that is always
displayed.
Default screen:
– CONTINUED –
Instruments and controls/Combination meter display (color LCD)
3-39
3
To Next Page
Loading...
Need help?
General
