北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
! Other markings
S13AB0103
The following makings are also
placed on the sidewall.
! Maximum permissible infla-
tion pressure
S13AB010301
The maximum cold inflation pres-
sure to which this tire may be
inflated. For example, “300 kPa
(44 PSI) MAX. PRESS”
! Maximum load rating
S13AB010302
The load rating at the maximum
permissible weight load for this tire.
For example, “MAX. LOAD 580 kg
(1279 LBS) @ 300 kPa (44 PSI)
MAX. PRESS.”
WARNING
Maximum load rating applies
only to the tire, not to the
vehicle. Putting a load rated
tire on any vehicle does not
mean the vehicle can be
loaded up to the tire’s rated
load.
! Construction type
S13AB010303
Applicable construction of this tire.
For example, “TUBELESS STEEL
BELTED RADIAL”
! Construction
S13AB010304
The generic name of each cord
material used in the plies (both
sidewall and tread area) of this tire.
For example, “PLIES: TREAD 2
STEEL + 2 POLYESTER SIDE-
WALL 2 POLYESTER”
! Uniform Tire Quality Grad-
ing (UTQG)
S13AB010305
For details, refer to “Uniform tire
quality grading standards” F13-15.
& Recommended tire inflation
pressure
S13AB02
! Recommended cold tire in-
flation pressure
S13AB0201
For recommended cold tire inflation
pressure for your vehicle’s tires,
refer to “
Tires” F12-8.
! Vehicle placard
S13AB0202
The vehicle placard is affixed to the
driver’s side B-pillar.
Example:
Consumer information and Reporting safety defects/Tire information
13-4
To Next Page
Loading...
Need help?
General
