北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
market and vehicle specifications.
Multi-function display
1) Clock
2) Climate control (displayed only when the
ignition switch is in the “ON” position)
3) Outside temperature
4) Information screen
NOTE
. The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following condi-
tions.
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
– When starting the engine after
being parked for a certain period of
time
& Welcome screen
S03BP07
When the driver’s door is closed, the
welcome screen will appear for a short
time.
NOTE
. The welcome screen will disappear
when the ignition switch is turned to the
“ON” position while the welcome
screen is displayed.
. You can set the welcome screen to
on or off. For details, refer to “Bypass
screen setting” F3-57.
. For a certain period of time after the
welcome screen has once appeared, it
may not appear again even when the
driver’s door is closed again. This does
not indicate a malfunction.
& Self-check screen
S03BP09
When the ignition switch is turned to the
“ON” position, the vehicle self-check will
be performed. The screens corresponding
to the following items will appear one after
another for several seconds each.
1) Inspection and maintenance: Checks the
interval of inspection and maintenance.
2) Engine oil: Checks the interval of engine
oil replacement.
3) Oil filter: Checks the interval of oil filter
replacement.
4) Tires: Checks the interval of tire rotation.
– CONTINUED –
Instruments and controls/Multi-function display (color LCD)
3-45
3
To Next Page
Loading...
Need help?
General
