北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
& Manual mode
S07AY02
In the manual mode, you can use the
center differential control switch to adjust
the initial LSD torque as desired. When
this mode is selected, the “AUTO” indica-
tor disappears.
! Center differential control switch
and indicator
S07AY0202
The control switch is located beside the
parking brake lever. Push the control
switch forward or pull it rearward to change
the initial LSD torque.
The center differential indicator on the
combination meter gives six levels of
indication. The indicator and control switch
are linked; when operating the switch to
change the initial LSD torque, the indicator
changes accordingly.
Push the switch forward to increase the
initial LSD torque; when the “LOCK”
indicator appears, the initial LSD torque
setting is maximum. The center differential
will then be almost completely locked.
– CONTINUED –
Starting and operating/Driver’s Control Center Differential (C.DIFF/DCCD) (STI)
7-21
7
To Next Page
Loading...
Need help?
General
