910R/950R/950T/970T - SAFETY 35
910R/950R/950T/970T - SAFETY 35
SAFETY
Follow these guidelines before operating any jobsite equipment:
• Read and follow all safety precautions.
• Complete proper training and read operator’s manual before
using equipment.
• Use equipment only as directed.
• Contact One-Call (888-258-0808) and any utility companies
which do not subscribe to One-Call. Have all underground
pipes and cables located and marked before sweeping area.
• Classify jobsite based on its hazards and use correct tools
and machinery, safety equipment, and work methods for
jobsite.
• Wear personal protective equipment.
• Check that equipment is in good condition, and test leads are
clean and have no cracked insulation.
• Contact your Subsite Electronics dealer if you have any
question about operation, maintenance, or equipment use.
SAFETY
Follow these guidelines before operating any jobsite equipment:
• Read and follow all safety precautions.
• Complete proper training and read operator’s manual before
using equipment.
• Use equipment only as directed.
• Contact One-Call (888-258-0808) and any utility companies
which do not subscribe to One-Call. Have all underground
pipes and cables located and marked before sweeping area.
• Classify jobsite based on its hazards and use correct tools
and machinery, safety equipment, and work methods for
jobsite.
• Wear personal protective equipment.
• Check that equipment is in good condition, and test leads are
clean and have no cracked insulation.
• Contact your Subsite Electronics dealer if you have any
question about operation, maintenance, or equipment use.
To Next Page
Loading...