14 | Sub-Zero Customer Care 800.222.7820
WATER FILTER BYPASS
If the water filtration system will not be used, it can be
bypassed by removing the water filter.
To Remove the Water Filter:
1 To access the water filter, rotate the bottom of the grille
upward.
2 To remove the filter, rotate counterclockwise one-
quarter turn, then pull out. Refer to the illustration
below.
Water filter removal
WATER FILTER
Completion
Install the grille assembly and check for proper fit. Recon-
nect the network cable. Refer to page 7. Attach the net-
work cable to the grille using the cable ties provided.
Reinstall the drain pan and verify it is in the proper position.
Install the kickplate using the screws to attach it to the
brackets on the inside of each roller base. Refer to the
illustration below. The kickplate must be removable for
service. The floor cannot interfere with removal.
Install the leg covers.
For initial start up, touch and hold
POWER on either
external touch display, located on the grille.
Kickplate installation
Installation
To Next Page
Loading...
Need help?
General
