The user must be able to leave the SCOOTER at any time and with extreme ease.
The diver must always carry a cutting device with him in the event that it is necessary to cut the tow cable that may
be used.
PROPER WAYS TO CONNECT THE DPV TO THE DIVER: HARNESS AND TOW CORD
The SCOOTER must be connected to the diver via a cable and a quick release carabiner.
Use the correct towing harness (see SUEX accessories) and the two cords provided.
Connect the carabiner to the front D-ring of the harness.
CORRECT WAY TO CONNECT THE TOW CORD TO THE SCOOTER
The tow cord must be connected to the SCOOTER on the two holes near the handle on the propeller conveyor, see
the following images.
To Next Page
Loading...
