1600H T4F Perkins User Manual 6: Controller
02250248-733 R03
Subject to EAR, ECCN EAR99 and related export control restrictions. 55
6.4 Service options
Service option sub-menus are accessed via the physical
MENU button on the front of the controller and the SER-
VICE OPTION soft key.
• CALIBRATE SENSORS: This feature is uti-
lized to calibrate machine pressure transducers
and temp sensors to known calibrated instru-
mentation. Sensor calibration is best left to
experienced personnel and should not be
needed under typical operating conditions.
• SETUP: Includes option for enabling/disabling
remote start and auto sleep. This menu also
includes remote start and auto sleep setting
options.
• ENGINE DIAGNOSTICS: Displays any active
engine codes.
• SHUTDOWN HISTORY: A log is provided of all
abnormal shutdowns due to any fault condi-
tions. This also includes shutdowns where the
emergency stop button was used to stop the
machine.
• I/O DIAGNOSTICS: Displays state of digital
inputs and outputs of the controller as well as
analog sensor data to be used as a trouble-
shooting tool.
• FLEET OPTIONS: Includes settings for rental
fleet managers to customize available features
by job.
Figure 6-4: Service options layout
To Next Page
Loading...
