SECTION 3 3000P-4500 USER MANUAL
27
3.6 LUBRICATION CHANGE RECOMMENDATIONS AND
MAINTENANCE, FLUID
LUBRICANT FLUID CHANGE FLUID FILTER CHANGE SEPARATOR CHANGE
Sullube (3.0 gal) A, E G, C A, D
SRF 1/4000 (3.0 gal) B, E G, C B, D
24KT (3.0 gal) F, E G, C A, D
CP-4600-32-F (3.0 gal) B, E G, C B, D
A - 8,000 hours or once a year.
B - 4,000 hours or more frequently if conditions so require.
C - When measured pressure loss exceeds 20 psig (1.3 bar).
D - When measured pressure loss exceeds 10 psig (0.7 bar).
E - When required by fluid analysis or known contamination.
F - Does not require replacement during normal service conditions.
G - Every 2,000 hours.
To Next Page
Loading...
