SECTION 3 3000P-4500 USER MANUAL
33
3.9 IDENTIFICATION, AIR-COOLED W/ INTEGRAL DRYER
KEY
NO.
PART NO.
Q
T
Y
DESCRIPTION
1. ALLOW 4.00 FEET [1.25 METERS] MINIMUM CLEARANCE
AROUND MACHINE FOR ACCESS AND FREE CIRCULATION
OF AIR.
2. A FOUNDATION OR MOUNTING CAPABLE OF SUPPORTING
THE WEIGHT OF PACKAGE, AND RIGID ENOUGH TO MAIN-
TAIN THE COMPRESSOR FRAME LEVEL IS REQUIRED. THE
COMPRESSOR FRAME MUST BE LEVELLED AND SECURED
BETWEEN THE FRAME AND THE FOUNDATION. NO PIPING
LOADS ARE PERMITTED AT EXTERNAL CONNECTIONS.
3. ALL DIMENSIONS ARE +/- .50" [12.7MM].
4. RECOMMENDED INCOMING CUSTOMER POWER SUPPLY IS
SHOWN ON DRAWING.
5. IF DUCTWORK IS TO BE INSTALLED FOR COOLING AIR, HIGH
STATIC FAN MUST BE SELECTED. MAX ALLOWABLE ADDI-
TIONAL STATIC PRESSURE 0.4 IN WATER WITH HIGH STATIC
FAN.
6. DOORS ARE REMOVABLE USING LIFT-OFF HINGE PINS.
7. ALL DIMENSIONS SHOWN IN INCHES WITH MILLIMETER
DIMENSIONS IN PARENTHESES.
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR
MACHINE WEIGHTS
Main Motor
HP
Motor Type
Weight
(Lbs/Kg)
Cooling Air
(CFM)
3000P 40 odp 2277/1033 4800
3000P 40 tefc 2343/1063 4800
3700 50 odp 2327/1055 4800
3700 50 tefc 2411/1094 4800
4500 60 odp 2477/1124 5600
4500 60 tefc 2554/1158 5600
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
