8.23 DECAL LOCATIONS, AIR-COOLED (CONTINUED)
Key Description Part Number Note Quantity
A1 Both Sides of Machine
A2 Center Stripes Vertically Based on Location of WS Controller Decal
A3 Locate Decals on both Sides of Machine by Using Location of End Stripe and WS Controller Location
A4 Used Only On VSD Machines
A5 Used On Parallel Wye Machines Only
A6 Air-cooled Only
A7 Water-cooled Only
A8 Not used on 575V VSD machines
(I) Attach to the bottom on inside of starter box.
(II) Attach to inside of starter door.
(III) Attach to sub-panel inside starter box.
(IV) Attach to top of shipping strap.
(V) This part will vary by model. Consult factory with serial number.
PARTS LISTS
®SULLAIR®
3000-4500 Operator’s Manual and Parts List
127
To Next Page
Loading...
