34
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
SECTION 2
Engine Shutdown Codes
During normal operation the single or four parameter 1.
screen will be displayed.
When the diagnostic gauge receives a severe trouble 2.
code from the engine control unit, the single of four
parameter screen will be replaced with a
SHUTDOWN message. The SPN and FMI number
will be displayed along with a description of the
problem and the required corrective action.
If the word NEXT appears above the arrow keys,
there are more trouble codes that can be viewed by
using the arrow keys to scroll to the next trouble
code.
To acknowledge and hide the trouble code and return 3.
to the single or four parameter display, press the
ENTER key.
IMPORTANT: Ignoring active trouble codes can
result in severe engine damage.
The display will return to the single or four parameter 4.
display, but the display will contain the SHUTDOWN
icon. Pressing the ENTER key will redisplay the
hidden trouble code.
IMPORTANT: Ignoring active trouble codes can
result in severe engine damage.
Figure 2-35
Figure 2-36
Figure 2-37
Figure 2-38
To Next Page
Loading...
