47
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
DESCRIPTION
Press the ENTER key to change the selected 10.
parameter in the quadrant to the new parameter.
Use the Menu key to return to the SETUP 4-UP 11.
DISPLAY screen.
The selected quadrant has now changed to the new 12.
selected parameter.
Repeat the parameter selection process until all 13.
spaces are as desired.
Press the Menu key to return to the Main Menu. 14.
Note the number to the right of the
selected parameter indicating that
the parameter is now assigned to
Figure 2-87
Figure 2-88
Figure 2-89
Figure 2-90
To Next Page
Loading...
