Sullair ES-8 - Page 59

Section 11
ILLUSTRATIONS AND PARTS LIST
53
11.5 INLET FILTER, COMPRESSOR HOUSING/SUMP AND PARTS (ES- -8)
key part
number description number quantity
1 filter, air cyclopac 6 1/2” (I) 043333 1
2 band, mounting 6 1/2” 043370 2
3 capscrew, M6 x 16MM 828006---016 4
4 washer, 6MM 865406---125 4
5 reducer, hose 2 1/2” x 2 1/4” 049779 1
6 clamp, hose 250018---550 2
7 elbow, rubber 90 2 1/2” 1 piece 02250048---321 1
8 valve, pressure relief 1/2” (200 psi/13.8 bar) 250039---678 1
9 nipple, air intake 02250047---425 1
10 hose, nylon 842215---004 3
11 tee, branch swivel 1/4”T x 1/8”NPT 250025---834 1
12 plug, oil fill hex 250039---359 1
13 screw, drive #8 x 3/8” 839608---060 2
14 elbow, 90 1/8”NPT x 1/4”T 250025---849 1
15 plate, identification 250026---859 1
16 capscrew, socket M16 x 70MM 829316---070 1
17 unit, compressor assy 02250046---369 1
18 connector, tube 3/4” 02250048---819 2
19 capscrew, socket M16 x 60MM 829316---060 4
20 adapter, oil filter 250025---914 1
21 element, fluid filter (II) 250026---982 1
22 washer, 8MM 865408---170 3
23 capscrew, socket M8 x 60MM 839308---060 3
24 tube, oil drain extension 02250046---999 1
25 tee, tube 3/4” 811412---075 1
26 probe, rtd 02250048---457 1
27 cap, tube 3/4” 250042---615 1
28 capscrew, M16 x 100MM 829316---100 16
29 housing, bell 250034---035 1
30 elbow, 90 1/4” x 1/4” 250025---850 2
31 bushing, reducing 1/2” x 1/8” 807602---005 1
32 fitting, compression 250028---635 1
33 o---ring, viton 3 1/8” x 1/8” (III) 826502---235 1
34 cap, separator element 250035---590 1
35 o---ring, viton 1 7/16” x 3/32” (III) 826502---127 1
(Continued on page 55)
(I) For maintenance on air filter no. 043333, order repair kit no. 043334.
(II) For maintenance on fluid filter no. 250026---982, order repair kit no. 02250050---602.
(III) For ma intena nce on air/fluid sepa r ator, order repair kit no. 02250050---604.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR/DRYER.