Sullair ES-8 - Page 63

Section 11
ILLUSTRATIONS AND PARTS LIST
57
11.6 COMPRESSOR COOLER SYSTEM AND PARTS (ES--8)
key part
number description number quantity
1 insert, threaded blind 6MM 02250047---083 20
2 aftercooler 250040---092 1
3 capscrew, M6 x 12MM 829306---012 10
4 cooler, oil (15,20 HP/11,15KW) 250039---096 1
Scooler, oil (25,30 HP/18.5, 22KW) 02250046---054 1
5 capscrew, M6 x 20MM 829306---020 8
6 foam, cooler oil/air 02250052---480 2
7 washer, 8MM 865408---170 7
8 cover, access 02250046---910 1
9 capscrew, 8M x 16MM 829308---016 6
10 elbow, tube 3/4” 02250048---820 1
11 washer, 6MM 865706---180 8
12 tube, oil in 02250047---245 1
13 hose, medium pressure 1” x 18” 249616---007 1
14 elbow, 90 37FL 02250048---094 1
15 angle, support cooler 02250046---915 5
16 tube, oil out 02250047---244 1
17 grommet, rubber 040125 2
18 support, cooler (15,20 HP/11,15KW) 02250045---567 1
Ssupport, cooler (25,30 HP/18.5, 22KW) 02250048---302 1
19 cover, end coler support 02250046---911 1
20 cover, access cooler support 02250048---123 1
21 washer, 6MM 865406---125 2
22 capscrew, hex 6M x 16MM 828006---016 4
23 elbow, 90 swivel 1/8” NPT 250025---849 1
24 connector, straight thd 02250048---819 1
25 weatherstrip, 1/2” x 1” 245738 5.5 ft.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR/DRYER.