INSTALLATION, START-UP & MAINTENANCE MANUAL
MODEL NO.: SD-820 / SD-1710
REV 1 – AUGUST 03,.2001
Annex A 5
8. EXPOSURE CONTROLS / PERSONAL PROTECTION (Continued)
Skin Protection
Skin contact should be minimized through use of gloves and suitable long-sleeved clothing (i.e. shirts and
pants). Consideration must be given both to durability as well as permeation resistance.
Work Practice Controls:
Personal hygiene is an important work practice exposure control measure and the following general
measures should be taken when working with or handling this material:
(1) Do not store, use, and/or consume foods, beverages, tobacco products, or cosmetics in areas
where this material is stored.
(2) Wash hands and face carefully before eating, drinking, using tobacco, applying cosmetics or using
the toilet.
(3) Wash exposed skin promptly to remove accidental splashes of contact with this material.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical and chemical properties here represent typical properties of this product. Contact the business area
using the Product Information phone number in Section 1 for its exact specifications.
Physical Appearance:
White powder solid
Odour: Odourless
pH: Not Applicable
Specific Gravity: Not Available
Density:
3.3 g/ml at 25
°
C (77
°
F).
Water Solubility: Insoluble
Melting Point Range:
2050
°
C (3722
°
F)
Boiling Point Range: Not Available
Vapor Pressure:
1 mmHg at 2158
°
C (3916
°
F)
Vapor Density: Not Available
Molecular Weight: 101.96
To Next Page
Loading...