INSTALLATION, START-UP & MAINTENANCE MANUAL
MODEL NO.: SD-820 / SD-1710
REV 1 – AUGUST 03,.2001
Page 5
SECTION 1 INTRODUCTION
1.1 GENERAL INFORMATION
The adsorption dryer of the SD-820 – SD-1710 series is built according to the latest
technological developments and recognized safety rules. Its use however can endanger
life and limb of the user or of third parties, and can lead to considerable damage to the
adsorption dryer and other material assets if:
•
it is operated by personnel not trained or instructed in its use,
•
it is improperly used,
•
it is improperly maintained or serviced.
This can result in the loss of all damage claims.
This adsorption dryer is designed for neutral media free of aggressive water, oil and
solid elements.
S
S
u
u
l
l
l
l
a
a
i
i
r
r
®®
accepts no liability for corrosion damage and malfunctions
caused by aggressive media.
Applications other than those mentioned in this manual must be agreed to by
S
S
u
u
l
l
l
l
a
a
i
i
r
r
®®
and confirmed in writing.
In the interest of further development,
S
S
u
u
l
l
l
l
a
a
i
i
r
r
®®
reserves the right to make changes at any
time, which, in keeping with the essential characteristics of the adsorption dryer
described here, may be necessary for increasing efficiency or for reasons relating to
safety or to normal business practice.
1.2 SAFETY INSTRUCTIONS
This technical manual contains basic tips, which must be followed during set-up,
operation and servicing. It is thus of utmost importance that it be read by the assembly
technician before installation and start-up as well as by the specialist / operator in
charge, and it must always be within reach at the place where the adsorption dryer is
being used.
To Next Page
Loading...
Need help?
General
