Sullair SUPERVISOR CONTROLLER Instruction Manual

Section 1
SAFETY AND
INTRODUCTION
2
master-slave relationship) so the system remains operational even if a member is taken
off-line. Both the Supervisor Controller and WS Controller can be configured with up to
16 machines in a sequence system. When one or more Supervisor II Deluxe Controllers
are in the system, the maximum number of machines is eight. Refer to Section 2 for
details.
A system with one or more variable-speed compressors offers additional opportunities for
control. Refer to Section 3 for details on sequencing with variable speed compressors.
Section 4 covers application of controllers in master-controlled systems.
Section 5 describes the operation of timers used in an internal sequencing system.
Section 6 contains technical details of the hardware and protocol used on the
communication bus. Other equipment may monitor the communication bus for data and
assessment of system performance.

Sullair SUPERVISOR CONTROLLER Specifications

General

Brand	Sullair
Model	SUPERVISOR CONTROLLER
Category	Controller
Language	English