Section 8
ILLUSTRATIONS AND PARTS LIST
93
8.17 COMPRESSOR DISCHARGE SYSTEM -- 200 -- 300HP/150 -- 225KW (WATER-- COOLED)
(continued)
key part
number description number quantity
33 washer, springlock 3/4” 837512---188 12
34 nut, hex 3/4” 824212---665 4
35 nipple, pipe 3/4” x 31/2” 822112---035 1
36 elbow, pipe 90_ 3/4” 801515---030 3
37 nipple, pipe 3/4” x 7” 822112---070 1
38 valve, globe 3/4” 040520 1
39 tank, sump fluid separator 30” 250002---038 1
40 plug, pipe 1 1/2” 802815---060 2
41A element, separator (primary) (IV) 250034---123 1
41B S element, separator (secondary) (V) 250034---129 1
42 connector, 1/4”x 1/4” 020169 1
43 fitting, tube---m 1/2” x 1/4” 020501 1
44 nipple, pipe 4” x close 822264---000 2
45 elbow, pipe 90_ 4” 801515---160 3
46 nipple, pipe 1” x close 822224---000 1
47 elbow, tube---m 3/8” x 1/4” 810506---025 1
48 coupling, flexible (VI) 041085 1
49 nipple, pipe 4” x 61/2” 822164---065 1
50 capscrew, hex 3/4” x 3 1/2” 828612---035 4
51 washer, springlock 3/4” 837512---188 12
52 flange, threaded reducing 4” x 11” 818664---110 1
53 gasket, flange 240621---12 1
54 separator, 3” combination trap (VII) 250004---596 1
55 capscrew, ferry head 5/8” x 6” 828410---600 6
56 tubing, steel 1 1/2” 841115---024 20 ft.
57 reinforcement, 15 1/2” 250035---138 2
58 support, cooler 250005---041 2
59 plug, pipe 3/8” 802815---010 1
60 elbow, pipe 90_ 1 1/2” 801515---060 2
(continued on Page 51)
(IV) For maintenance on primary sepa r ator element no. 250034---123, order replacement kit
no. 250034---124.
(V) For maintenance on secondary separ ator element no. 250034---129, order replacement kit
no. 250034---130.
(VI) For maintenance on flexible coupling no. 041085, order repair kit no. 041353.
(VII) For maintenance combination trap w /heater no. 250004---596, order repair kit no.
250033---036 and heater element replacement no. 245572.
PLEASE NOTE: WHEN ORDERING PARTS, INDICA TE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
