Section 8
ILLUSTRATIONS AND PARTS LIST
75
8.12 REMOTE COOLER FLUID COOLING SYSTEM -- 200 -- 250HP/150 -- 187KW ( AIR-- COOLED)
key part
number description number quantity
1 screw, hex serrated washer 1/16” x 1 1/4” 829705---125 6
2 washer, pl---b regular unfinished 1/2” 837205---071 18
3 nut, hex flanged plated 1/16”---18 825305---283 12
4 guard, fan 42” 241283 1
5 fan, 42” diameter 406966 1
6 panel, Ventu ri 250001---202 1
7 capscrew, hex gr5 3/8”---16 x 1” 828606---100 26
8 washer, pl---b regular unfinished 3/8” 837206---071 52
9 washer, springlock regular 3/8” 837506---094 26
10 panel, left hand 250001---207 1
11 nut, hex unfinished 3/8”---16 824206---337 26
12 elbow, reducing 3” x 2” 150# 801612---080 1
13 nipple, pipe xs 2” x close 822232---000 3
14 panel, top and bottom 250001---209 2
15 nut, retainer 1/2”---18 860905---163 12
16 cooler, fluid 040961 1
17 screw, hex serrated washer 1/2” x 1” 829705---100 12
18 aftercooler 041807 1
19 panel, right hand 250001---203 1
20 tee, reducing 2” 802208---082 1
21 nameplate, serial aluminum 040052 1
22 rivet, pop 1/8” x 3/8” 843102---038 4
23 capscrew, hex gr5 1/2”---13 x 2” 828608---200 12
24 washer, pl---b regular unfinished 1/2” 837208---112 18
25 elbow, pipe 90_ 2” 150# 801515---080 2
26 nipple, pipe 2” x 10” 822132---100 1
27 union, pipe brass seat 2” 150# 802515---080 1
28 bushing, reducer hex 3” x 2” 802112---080 1
29 separator, 3” combination trap/heater (I) 250004---596 1
30 u---bolt, 1/2” x 8” pipe 829008---800 2
31 nipple, pipe xs 3” x close 822248---000 1
32 union, pipe brass seat 3” 150# 802515---120 1
33 motor, 7.5 HP/5.6KW 050795 1
34 support, motor 250001---197 1
(continued on Page 29)
(I) For maintenance on combination trap with heater separator no. 250004---596, order repair
kit no. 250033---036, and heater element replacement no. 245572.
PLEASE NOTE: WHEN ORDERING PARTS, INDICA TE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
