Section 8
ILLUSTRATIONS AND PARTS LIST
55
8.5 M OTOR, COMPRESSOR, FRAME AND PARTS -- 400HP/300KW
key part
number description number quantity
1 motor, 400HP/300KW 250022---787 1
2 capscrew, hex gr5 5/8”---11 x 3” 828610---300 4
3 coupling, assembly 2 3/8” diameter (I) 02250043---132 1
4 support, motor 250009---569 2
5 disc, shrink 250009---242 1
6 guard, coupling --- left hand 250007---361 1
7 washer, regular 3/8” 837206---071 3
8 capscrew, hex gr5 3/ 8”---16 x 1 1/4” 828606---125 3
9 nut, hex 3/8”---16 824206---337 3
10 capscrew, hex gr5 3/8”---16 x 3/4” 828606---075 3
11 guard, coupling --- right hand 250007---362 1
12 compressor unit (II) --- 1
13 capscrew, hex gr5 3/8”---9 x 4” 828614---400 4
14 shim set, motor mounting 022031 4
15 washer, regular 7/8” 837214---174 4
16 washer, springlock regular 7/8” 837514---219 4
17 nut, hex 7/8”---9 824214---776 4
18 frame, base 250024---572 1
19 nut, hex 5/8”---11 824210---559 4
20 washer, springlock 5/8” 837510---156 4
21 washer, regular 5/8” 837210---112 4
22 guard, coupling --- left hand 250007---361 1
(I) For maintenance on coupling no. 02250043---132, order repair kit no. 02250044---346.
(II) There is an exchange program whereby a remanufactured compressor unit can be
obtained from Sullair distributors or the factory at less cost than the owner could repair
the unit. For information regarding the unit exchange program, contact your nearest
Sullair representative or the Sullair Corporation.
The shaft seal is not considered part of the compressor unit in regard to the 2 year
warranty. The normal Sullair parts w arranty applies. For shaft seal repairs, order shaft
seal repair kit No. 067329---001.
PLEASE NOTE: WHEN ORDERING PARTS, INDICA TE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
