Section 8
ILLUSTRATIONS AND PARTS LIST
91
8.17 COMPRESSOR DISCHARGE SYSTEM -- 200 -- 300HP/150 -- 225KW (WATER-- COOLED)
key part
number description number quantity
1 aftercooler, water---cooled 042950 1
2 nut, hex 5/8” 829210---559 24
3 was her, springlock 5/8” 837510---156 24
4 flange, threaded reducing 3” x 9” 819548---090 1
5 capscrew, hex gr5 5/8” x 3” 828610---300 24
6 nipple, pipe 3” x 3” 822148---030 1
7elbow,pipe90_ 3” 801515---120 2
8 coupling, flexible 3” (I) 040327 1
9 nipple, ha lf pipe 4” x 15” 822864---150 1
10 nipple, half pipe 3” x 7 1/2” 822848---075 1
11 nipple, pipe 3” x 9” 822148---090 1
12 valve, minimum pressure check 3” npt (II) 250033---821 1
13 elbow, tube---m 1/4”x 1/4” 810504---025 1
14 tubing, steel 1/4” 841115---004 6 ft.
15 nipple, pipe 3” x close 822248---000 1
16 reinforcement, 3” 250035---136 8
17 silencer, air 3/4” 040758 1
18 bushing, reducing 1” x 3/4” 802104---030 1
19 nipple, half pipe 822864---140 1
20 valve, blowdown 1” ac 2---way (III) 409783 1
21 tubing, steel 3/8” 841115---006 10 ft.
22 nipple, pipe 1 1/4”x close 822220---000 2
23 elbow, pipe reducing 90_ 1 1/4”x 1” 801605---040 1
24 union, pipe 11/4” 802515---050 1
25 valve, relief 1 1/2” 150 psig (10.3 bar) 407003 1
26 capscrew, hex gr5 3/4” x 2 1/2” 828612---250 8
27 washer, regular 3/4” 837212---112 4
28 plug, o---ring boss 1 1/4” 040029 1
29 adapter, filler 020044 1
30 glass, fluid level sight 1 1/2” 040279 1
31 tee, pipe 1 1/2” x 1 1/2” x 1 1/2” 802415---060 1
32 nipple, pipe 1 1/2” x close 822224---000 2
(continued on Page 93)
(I) For maintenance on flexible coupling no. 040327, order repair kit no. 040523.
(II) For maintenance on minimum press ure/check valve no. 250033---821, order repair kit
no. 250018---262.
(III) For maintenance on blowdown valve no. 409783, order repair kit no. 001667.
PLEASE NOTE: WHEN ORDERING PARTS, INDICA TE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
