Section 8
ILLUSTRATIONS AND PARTS LIST
105
8.19 REMOTE COOLER COMPRESSOR DISCHARGE SYSTEM -- 400HP/300KW (AIR-- COOLED)
(continued)
key part
number description number quantity
36 nut, hex 7/8”---9 824214---776 4
37 capscrew, hex gr5 7/8”---9 x 2 1/2” 828614---250 4
38 screw, hex socket set 1/2”---18 x 1/2” 832205---050 1
39 lever, valve 250010---326 1
40 nut, hex locking 7/16”---20 825707---223 2
41 rod, end spherical 7/16”---20 250010---158 1
42 cylinder, air 1 1/2” 408825 1
43 screw, machine shoulder 3/8” x 2” 830506---200 1
44 elbow, pipe 90_ 1/4”---18 860504---025 1
45 hose, hydraulic 1/4” x 64” 040413 1
46 bracket, actuator 019634 1
47 nut, hex 3/8” 824206---337 1
48 nut, hex 5/8” 824210---559 8
49 washer, springlock 5/8” 837510---156 8
50 gasket 242437---010 2
51 valve, butterfly 4” 049151 1
52 flange, threaded 4” 819315---064 1
53 capscrew, hex gr5 5/8”---11 x 5” 828610---500 8
54 elbow, tube---m 1/4” x 1/4” 810504---025 2
55 capscrew, hex gr5 3/4”---10 x 3 1/2” 828612---350 16
56 valve, check 4” 041076 1
57 valve, check assembly part of unit 1
58 tank, fluid sump 30” x 84” horizontal 250005---579 1
59 gasket, flange 240621---12 1
60 tank, fluid separator 24” x 70” vertical 250005---582 1
61 valve, globe 3/4” 040520 1
62 nipple, pipe 3/4” x 9” 822112---090 1
63 elbow, pipe 90_ 3/4” 801515---030 1
64 nipple, pipe 3/4” x 1 1/2” 822112---015 1
65 separator, air/fluid --- primary (II) 250034---125 1
66 separator, air/fluid --- secondary (III) 250034---131 1
67 washer, springlock regular plated 3/4” 838512---188 12
(continued on Page 107)
(II) For maintenance on primary air/fluid separator no. 250034---125, order repair kit
no. 250034---126.
(III) For maintenance on secondary air/fluid separator no. 250034---131, order repair kit
no. 250034---132.
PLEASE NOTE: WHEN ORDERING PARTS, INDICA TE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
