Section 8
ILLUSTRATIONS AND PARTS LIST
71
8.11 FLUID COOLING SYSTEM -- 500 -- 600HP/375 -- 450KW (WATER-- COOLED)
key part
number description number quantity
1 cooler, fluid 250007---801 1
2 connector, tube---m 2” x 2” 810232---200 6
3elbow,pipe90_ 2” 801515---080 3
4 nipple pipe 2” x 6” 822132---060 1
5 manifold 02250055---260 1
6 tee, pipe 2 1/2” x 2” x 2” 802210---088 1
7 nipple, pipe 2 1/2” x 4” 822140---040 2
8 flange, threaded reducing 2 1/2” x 7 1/2” 819540---075 3
9 gasket, flange 240621---8 4
10 nut, hex 5/8”---11 824210---559 16
11 washer, springlock 5/8” 837510---156 16
12 capscrew, hex gr5 5/8”---11 x 3” 828610---300 16
13 nipple, pipe 2 1/2” x 6” 822140---060 1
14 adaptor, port 1 1/2” 250007---221 1
15 nipple, pipe 2” x close 822232---000 7
16 connector, tube---m 1 1/ 2” x 1 1/2” 810224---150 1
17 tube, 1 1/2” 02250058---225 1
18 tee, 1 1/2” 802415---060 1
19 plug, pipe 1/2” 807800---020 3
20 tee, reducing 2” x 1/2” x 2” 802208---028 3
21 adaptor, port 2” 250007---220 4
22 filter, fluid (I) 250007---219 2
23 tee, pipe 2” 802415---080 1
24 nipple, pipe 2 1/2” x close 822240---000 1
25 nipple, pipe 2” x 4” 822132---040 2
26 elbow, pipe 1 1/2” 801515---060 2
27 valve,fluidstop2”(II) 016742 1
28 tee, reducing 1 1/2” x 1/ 2” x 1 1/2” 802206---026 1
29 nipple, pipe 1 1/2” x close 82224---000 1
30 nipple, pipe 2 1/2” x 7” 822140---060 1
31 elbow, pipe 90_ 2 1/2” 801515---100 3
32 nipple, pipe 2 1/2” x 14” 822140---140 1
(continued on Page 73)
(I) For maintenance on fluid filter no. 250007---219, order replacement kit no. 250008---956.
(II) For maintenance on fluid stop valve no. 016742, order repair kit no. 001684.
PLEASE NOTE: WHEN ORDERING PARTS, INDICA TE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
